1" MPT NON-COLLAPSIBLE SUCTION HOSE ASSEMBLY/SLOTTED PVC FILTER

1" MPT crimped on PVC end into a 1" non-collapsible suction hose assembly with an original slotted PVC filter.

This is a non-collapsible suction hose for use with a 1" FPT port 1" FPT suction/inlet port in these related industries. This is perfect for a 1" 3-way Banjo ball valve (BV16-3P). Order a second assembly and an AG160816-2 to set up a two-tank system.

At least 12' long x 1" MPT crimped on a 1" inner diameter clear non-collapsible suction hose w/ a slotted PVC filter. This assembly is comprised of an elbow for top draw from tank and to allow the user to fit the slotted filter end into a 55-gallon drum opening.

You must fabricate and provide the PVC sleeve to slip over the hose to the keep filter at bottom of tank. This assembly requires a 1 1/4" or 1 1/2" SCH 40 PVC pipe. 

Do not hard pipe plumb this filter. Must be able to remove filter for cleaning.

***Rex, the pump guru, invented this slotted filter for use with sodium hypochlorite. ***

FYI: 

The general rule of thumb when plumbing a pump is as follows:

Double the hose inner diameter in comparison to the pump inlet and always use non-collapsible hose.

For example, The Delavan 5850-201e has a 1/2" FNPT (female national pipe thread) port on the suction side of the pump. We recommend that you choose a 1" id hose with a 1/2" crimped on hose barb.

SKU: AG16TF16-D