Skip to content



  • UNIFLOW design provides continuous fluid flow forward through the pump, reduces cavitation risk and increases pump life
  • Unique spring loaded inlet valves and the flow through ceramic plungers allow excellent suction capabilities.
  • Ultimate portability, less than 11 pounds, less than 10" long.
  • Regulating unloader is standard on each pump to assure system pressure control and pump protection


  • Plunger Pump
  • Direct Drive
  • Maximum Volume: 3.0 GPM
  • Maximum Discharge Pressure: 1500 PSI
  • Maximum Inlet Pressure: 75 PSI
  • Maximum Pump Speed: 3450 RPM
  • Minimum Horsepower Requirements: 3.0 bhp
  • Bore: .708" (18mm)
  • Stroke: .177" (4.5mm)
  • Crankcase Capacity: 11.83 oz. use CAT Pump hydraulic oil
  • Maximum Fluid Temperature: 160 Degrees F.
  • Inlet Port: 3/8" FPT
  • Discharge Ports: Dual 3/8" FPT
  • By-pass Port: 1/4" FPT
  • Dimensions: 9.13" x 6.65" x 6.50"
  • Weight: 11.83 lbs
Lubrication: fill crankcase with CAT Pump hydraulic oil per pump specifications. DO NOT RUN PUMP WITHOUT OIL IN CRANKCASE. Change initial oil after a 50 hour break-in period, and every three months or 500 hour intervals thereafter.

This collection is empty

View all products