1" FPT BANJO Y-STRAINER WATER FILTER INCLUDES 80 MESH FILTER
1" FPT y-strainer water filter includes 80 mesh filter for pressure washers
**********No warranty over-tightening this filter. Cracking this filter is caused by over-tightening. No warranty**********
145 psi working pressure. Use non-drying liquid Teflon to install fittings into this filter. Entrained air in water in a pump will cause irreparable damage.
***Supply/suction hose inner diameter (id) should be doubled compared to the pump inlet/suction port. For example, the general pump TS2021(hp5535) has a 1/2" inlet on either side of the bottom manifold of the pump. The pump should be supplied with 1" non-collapsible suction hose.
Need the whole plumbing kit? We supply this filter in a kit. If you have a 3-6 gpm pressure washer plumbed to a horizontal leg tank look for part number PL-4-TA or if plumbing to an IBC tote look for part number PL-4-TO. The kit includes everything you need to correctly plumb a pressure washer according to the pump guru, REX!