Skip to content


Original price $1,785.00 - Original price $1,785.00
Original price
$1,785.00 - $1,785.00
Current price $1,785.00

pressure-pro eb4040hg portable cart cold 4 gpm 4000 psi pressure washer

in stock and usually ships in 7-10 business days

please order this unit by adding to cart and choosing local pick up. we ship everywhere in the united states via estes express using great rates to your door.

4 gpm 4000 psi honda gx390 13 hp general pump hp4040 v-belt aluminum frame 50 mesh inlet filter, commercial unloader, low oil shutdown, new no flat tires, thermal relief valve, gun/wand assembly with general pump quick connects, 50' high pressure grey hose with general pump quick connects, 5 general pump quick connect nozzles, 20% high draw chemical injector assembly with general pump quick connects

we highly recommend adding the best high pressure 3/8"" ball valve (6292) to this order to allow you to turn off the flow of water to switch from the gun to a whisper wash 16"" ultra surface cleaner (6717).

the 16"whisper wash ultra with the upgraded 3/8"" high pressure hose is the perfect complement to this cold pressure washer. you will need 25 degree 2.0 nozzles in the surface cleaner.

if supplying with a garden hose from a property, use a 3/4"" id garden hose. if supplying water from a tank, use 1"" non-collapsible suction hose with a 1"" y-strainer (ys16h). we have a 4 gpm plumbing kit for pressure washers that includes everything needed to plumb this unit to a tank pl-4-ta or pl-4-to.

install a high temperature hudson float valve (hudson-ht) using everything you need to install it with our hudson assembly (hudson-a). the hudson assembly installs into the very top of the tank using a bulkhead and garden hose connection to prevent the tank from over-flowing.

inlet line size should be adequate to avoid starving the pump. • line size must be a minimum of one size larger than the pump inlet fitting. avoid tees, 90 degree elbows or valves in the inlet line of the pump to reduce the risk of flow restriction and cavitation. • the line must be a flexible hose, not a rigid pipe, and reinforced on suction systems to avoid collapsing. • the simpler the inlet plumbing the less the potential for problems. keep the length to a minimum, the number of elbows and joints to a minimum (ideally no elbows) and the inlet accessories to a minimum. • use pipe sealant to assure air-tight, positive sealing pipe joints (

this unit is available in skid or portable cart for the same cost.

Fast Shipping

Fast & Trackable Shipping

Give Us A Call

(727) 562-5488

Send Us An Email

Search for the products you're looking for.