4812H TITAN ALUMINUM 12" U-CHANNEL HOSE REEL STEEL MANIFOLD
4 week - 6 month lead on this reel
4812h u-channel titan products manual hose reel with upgraded 1/2" fpt super swivel (8620a) w/zerk fitting and 1/2" id steel manifold suitable for pressure washing and non-corrosive chemicals. the tt4812h-ss is a u-channel slim-line hose reel. this is a great reel for pressure washer hose and can easily be mounted to the passenger side railing of an open trailer with minimal fabrication. any of these reels can be mounted upside down to a properly reinforced infra-structure.
you need two reducing bushings (2578) and a street 45 (3361) plus a two wire jump for this reel. if your pressure washer has a plug on the outlet, you need a 3/8" female coupler (2401 or 4630 ss), a 3/8" female plug (3878 or 4959 ss) and a 3/8" male coupler (3004 or 4960ss) to install the jump hose to this reel.
we offer the reel with the upgraded 1/2" fpt super swivel (8620a) with a zerk fitting instead of the standard stainless swivel cnc'ed in-house by titan. we discovered over the years that the super swivel lasts longer when exposed to hot, high pressure water because it can be maintained with a grease gun. the 1/2" black iron manifold is connected to the the swivel and runs through the center of the reel and makes up the wetted components. as with most belongings in life, the better we take care of them, the longer they last. always strip out all of the hose from the reel prior to running water through it.
the full frame can handle a bit more abuse and pulling hose from the sides without 'tweaking' the reel. the full frame reels can be stacked easily and the u-channel cannot. the u-channel can be more easily mounted on the side railing of an open trailer without requiring too much fabrication while the full frame reels require a bigger support footprint. we suggest pairing this reel with one of our custom base plates to help you reach a more ergonomic position when manually operating this reel. we can also fabricate a base plate to meet your specific equipment needs.
capacity: holds 425'1/4", 300' 3/8" high pressure or low pressure hose, 200' 1/2" high or low pressure hose, flex tech rt, kuri tek or yellow ag hose with crimped on stainless steel ends or 150' 5/8" id, flex tech rt, kuri tek or yellow ag hose with crimped on ss hose ends we can cut a jump hose to your exact length and crimp on the hose ends for both high pressure and low pressure hose. a custom length of hose can be assembled in just about any hose we can get our hands on. we can offer a wide assortment of hose ends. we always recommend a two wire (r2) high pressure hose from your unloader on your pressure washer to the hose reel."https://www.pressurewasherproducts.com/titan-hose-reel-chart.html" href="https://www.pressurewasherproducts.com/titan-hose-reel-chart.html">https://www.pressurewasherproducts.com/titan-hose-reel-chart.html
***should you wish to switch out to the standard stainless steel swivel, please leave a note to us at the time of purchase. the cost is the same. thank you***
this reel has the estimated capacity to hold the following hose inner diameter hose lengths: 425' 1/4", 300' of 3/8", 200' of 1/2" and 150' of 5/8".