EB4042HV PORTABLE CART COLD 4 GPM 4200 PSI PRESSURE WASHER
portable cart cold 4 gpm 4200 psi pressure washer eb4040hv
3-4 week lead
please call 727-562-5488 m-f 8a-5p to order this unit. unit must be ordered over the phone and can be shipped anywhere in the united states.
4 gpm 4200 psi honda gx390 13 hp viper pump v-belt 50 mesh inlet filter, commercial unloader, low oil shutdown, pneumatic tires, thermal relief valve, gun/wand assembly with general pump quick connects, 50' high pressure grey hose with general pump quick connects, 5 general pump quick connect nozzles, 20% high draw chemical injector assembly with general pump quick connects
we highly recommend adding the best high pressure 3/8"" ball valve (6292) to this order to allow you to turn off the flow of water to switch from the gun to a whisper wash 16"" ultra surface cleaner (6717).
the 16"" whisper wash ultra with the upgraded 3/8"" high pressure hose is the perfect complement to this cold pressure washer.
if supplying with a garden hose from a property, use a 3/4"" id garden hose. if supplying water from a tank, use 1"" non-collapsible suction hose (agc16) with a 1"" y-strainer (ys16h). we have a 4 gpm plumbing kit for pressure washers that includes everything needed to plumb this unit to a tank (pl-4-ta or pl-4-to).
install a high temperature hudson float valve (hudson-ht) using everything you need to install it with our hudson assembly (hudson-a). the hudson assembly installs into the very top of the tank using a bulkhead and garden hose connection to prevent the tank from over-flowing.
this pressure washer is available in either skid unit or portable cart for the same cost
inlet line size should be adequate to avoid starving the pump. • line size must be a minimum of one size larger than the pump inlet fitting. avoid tees, 90 degree elbows or valves in the inlet line of the pump to reduce the risk of flow restriction and cavitation. • the line must be a flexible hose, not a rigid pipe, and reinforced on suction systems to avoid collapsing. • the simpler the inlet plumbing the less the potential for problems. keep the length to a minimum, the number of elbows and joints to a minimum (ideally no elbows) and the inlet accessories to a minimum. • use pipe sealant to assure air-tight, positive sealing pipe joints (http://www.catpumps.com/products/pdfs/993418b_ref_inlet%20condition%20check%20list_lor.pdf)