TRIBANGER NOZZLE HOLDER (HOLDS 3 1/4 MEG NOZZLES) NHTB

tribanger: 3 nozzle holder for soft washing or pressure washing

are you loosing nozzles? having a hard time digging into your pocket to find the right nozzle when your hand is wet? the tribanger is a nozzle holder that will hold 3 of the 1/4 meg nozzles. the tribanger the most popular nozzle holder for pressure washing. most washers install a 00, 15 degree and a 25 and 40 degree 1/4 meg threaded nozzle in the d

tribanger. the tribanger is composed of general pump female plugs in stainless steel. for the best connection, use a high quality general pump brand socket or coupler in stainless steel.

these nozzles holders are great for 8 gpm pressure washers. we recommend using nozzles installed in this holder to allow you to apply soap up high, rinse up high, use high pressure in a narrow and wider spray pattern. 

paired with 8 gpm @ 3500 psi, try out the following 1/4" meg nozzles to apply soap or rinse like a fire hose: 0040, 0050, 0060, 0070, 0080, 0090. 

to apply soap or rinse at low pressure with 8 gpm @ 3500 psi, try the following 1/4" meg nozzles: 1540, 2540, 4040, 6540, 1550, 2550, 4050, 6550, 1560, 2560, 4060, 6560 and larger.

to avoid needing to use an extension wand or ladder with your 8 gpm @ 3500 psi pressure washer to shoot far using a little pressure (knocking down bee's nests) try the following 1/4" meg nozzles: 0020, 0050, 0515, 0020 and 0025.

to rinse off the sidewalk after using the surface cleaner with 8 gpm @ 3500 psi use a 2520, 2525 or 2530 1/4" meg nozzle. 

when trying to size nozzles appropriately for less gallons per minute, drop down several nozzle orifices from the nozzles listed above. should you need assistance with choosing the nozzles, call or email us. we are happy to help you save time and money by choosing the correct nozzle for the job.

never use a nozzle smaller than the nozzle chart selects for your gallons per minute and pressure. for example, 8 gpm @ 3500 psi requires an 8.5 orifice nozzle.